QI Standard Smart Phone Wireless Charger

This product arrived in a very well designed protective box. After unpacking I found charger, cable and manual with very small letters and hillarious English translation (probably with google translate) so I started my review with a smile. Then I connect charger with a cable and computer and tried to charge my phone. Then I found I turned charger on wrong side (probably producer should mark charging surface in a future) and mobile started to charge normally. besides mobile I also tried to charge my Braun's wireless toothbrush and it also charges normally. generaly I am very happy with my charger and I reccomend it to everyone with a big smile. And a word of advice: charger is only 10w but cannot be used as fast charger,but,because of its size I reccomend use it permanently in a car as a wireless charger (factory built in Costs around 100 euros or more)

Characteristics: * New model of Qi wireless charger, more convenient. * Light and practical. * Simple design, suitable for all. * Built-in temperature control and overload chip. * It can only be used with the Qi wireless standard. * Compatible with all brands such as for iPhone 6 6plus, for Samsung Galaxy S1 2 3 4 for Samsung Note1 2 3 4 ect. Functional parameters: 1 input voltage: DC4.3V ~ 5.5V / 1.5 ~ 2A, on this alarm voltage and load stop range Output voltage: 5V + 0.1V, Charging current: 500 -1000 mAh Charging power: maximum can reach 5W Conversion efficiency: above 73% Transmission distance: maximum 10 mm, recommended distance between transmitter and receiver 2mm ~ 4mm Standby power: average power is less than 50 mW Overheat Protection: When the temperature is above 60 degrees, it will automatically stop charging for 1 minute, then recharge when the temperature has dropped.

This is an inexpensive QI wireless charger, just €2.08. It works, i have tested it with my LG smartphone. It's very convenient to use. The cons are: 1.The charging distance is 5mm