On top, they give you a troubleshooting guide instruction manual and a quick start guide, i think yeah and inside we have the hearing aids itself, the charging block and the accessories i’m going to take out the charging block. This is in the color white. Quite simple: you just put the hearing aids in there’s an led indicator right here. These dots indicate that if it’s plugged in or not – and i believe this is a charging indicator for the base itself – we have the us. This is where you would plug in the um usb cord. It doesn’t show you what i don’t think it shows you like a percentage level of how much battery you have left, but it might indicate um it in other ways. So we have our hearing aids itself. I’M gon na it’s in a plastic black case. Let me open this case up okay, so, as you can see, we have two hearing aids right here. I love how this is in two different colors, because oftentimes people have trouble um figuring out, which one goes to the what ear and if it’s color coded, i think it’s much more easier to be able to distinguish them um. This is the left ear in case um. You still don’t know what the colors mean different colors mean we do have a like a little l indicated at the very top to indicate that it’s the left ear over here. We have an on and off button right here and it’s, very tiny, but there’s on and off button, and we have the microphone right here.
It’S um indicated by those tiny little four dots. We have um these like two little pins on the corners. The golden pins are very, is like the charging contact and we have our dome right here, which you can switch out based on your size. We have, we have a volume control which i think is you wouldn’t need to screw it up or down um yeah this one like the volume control you can’t really touch it, but this volume control. I think you need something different uh to operate. It and it’s. Probably in the accessories box, so i’m gon na open up the accessories box and see what they gave us Applause. So these are the different domes that it comes with, which comes with the wall charger itself like a little brush with a flat screwdriver head. As i was mentioning that um, the volume control for the hearing aids might need to be controlled with like some sort of screwdriver edge, and it seems like this fits together. So this is how you would control it um and we have our charging uh cable. Finally, we have our charging block and our two hearing aids, so these are all the accessories that this comes with. So now we’re gon na look at how to charge the device we have banana basin charging base and we just plug in our usb cable right here and you can see like those quick blue lights, flashing and Music.
You can see that there is this blue light. Flashing right here that indicates that the battery is fully charged, but if um, if it was red – and that means it still needed to be charged more – the charging base itself. Now we have our two hearing – aids right here and i’m gon na try to plug it. In and to charge it and as you can see like it, doesn’t instantaneously light um light up. It takes a few seconds, so don’t worry about it and just like wait for it to light up and see how it’s like blinking red. That means it’s charging and it’s, not exactly a hundred percent, so it’s anywhere between zero to ninety nine percent, um and yeah. So if the red light, when it’s done charging, it will turn blue, okay and um green light means it’s 100 already, and it takes anywhere from about four to six hours for the device to fully charge and Music. The hearing aid standby time is about 20 hours.