Button below hit the notification bell, so you’re notified of the sweetest comic tips and tricks and unboxing. Just like this one check out, my vlog 130.8 hit the like button as well, so we can beat that youtube algorithm without further ado, let’s go ahead and look at sync wire. Basically, this is a mount a magnetic magnetic car mount for your car so that you can mount your phone on your dash. So let’s go ahead and open this up. Here we go yeah, so um, disclaimer alert, of course, for those of you who wants to use your phone during drives. I definitely don’t recommend that, first of all, you could get caught and it’s a very dangerous situation that you’re putting yourself in and get into car accidents and risk the lives of people around you. So let’s go ahead and see this and show you what we got here. You go this one’s by sync wire. This is the first time i’ve heard of this. Some literature right here and inside the box is a little tiny mount right there. Very nice let’s put that on the side for now so in this pouch it comes with another 3m backing right there, a couple more extras, there’s, also a sticker backing right there, some metal backings like that and some square ones there you go very nice there’s. Also, some wet wipes that they gave us so that you can clean the back of your phone.
You can wipe down your surfaces, so basically this is the sink wire right here, very nice design right there you go logo on the front. This is also a grip area right here, very nice. This also has a swivel very stiff, though so it won’t move during drives. There you go. This has just the sticker 3m backing, so you just stick this to any surface. You want like so and you’re good to go now. The metal docking that we get from here is very strong, as you can see there, there you go and then, if you are wanting to install this on your phone, all you need to do is grab your phone like so take off the case like that. Now the problem with this is, if you put in a middle part – and you have a phone that has wireless charging, then the wireless charging won’t work. So you can’t use that like that. But what i recommend on doing is maybe putting it on the bottom. Like so away from the coil, so that you’ll be able to still charge your phone wirelessly or you can put this square version instead, like so and then you’re good to go now. Let’S go ahead and put this in the back of a phone just like that, and then all you need to do is just slap this on right behind, like that, so just demonstration purposes, let’s put it right in the middle right there just like that, and then You’Ll be good to go there.
You go some bounce test right there. You could see that it’s, a very strong magnet it’s not going to fall down during rides. Very nice sync wire also claims that these has n52 magnets n stands for neodymium, magnets and 52. Is the unit of measurements of those magnets? Basically, the number is an expression that determines the maximum weight of which they can be magnetized. The number is, besides an indicator of the magnet strength, an expression of the strength measured in mega, goes or stead. I probably said that wrong. Now, if you go to sync wire website, they have a lot of accessories for your smartphone uh. You can get a bunch of chargers. They have different versions of that same car, mount that one that you could put on the vent and different versions as well. That can carry your phone pretty well. They have cables chargers, protection as well screen protectors and whatnot, so check them out and that’s pretty guys. Thanks for watching, i hope was able to help you on your choice on a car car mount just like this. If i was able to help, you make sure to hit that subscribe button below hit the notification bell, if you want to get one of these i’ll link, this down below everything, is an affiliate link as well. It does help out the channel a lot when you buy on that link, make sure to hit that like button as well. So we can beat that youtube algorithm.